1992-1996 Ford F-150 Manual Driver’s Side Mirror Replacement

步骤 1 Manual Driver’s Side Mirror




• Unscrew the two T25 Screws located on the sides of the mirror.
• The mirror should be bolted inside (which we will get to later), so the mirror should not fall.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2




• Inside the door panel, there are two Philips screws. One in the panel's upper right side, the other inside the door pull. Remove both.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Turn the crank handle until the knob is facing upward. Using a hook pick or a small flathead screwdriver, gently pry open the front cover.
• Rotating the cover out of your way, unscrew the T20 screw from inside the handle.
• To avoid losing the screw, slide the cover back over the handle without fully removing it. However, make sure not to clamp it closed.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Three plastic retaining clips are located at the bottom of the panel. To remove those clips, either use a fastener removal tool or your hands.
• Release the door panel from the door lock by lifting it up. To clear the door handle, move the door panel to the right.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• With the panel removed. Locate the 10 mm bolt near the speaker at the top. Using a 10 mm socket, loosen the bolt.
• Keep one hand on the mirror to prevent it from falling. This will remove the mirror from the truck.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• To remove the mirror, lift up and to the left to clear the arm inside the door.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与1其他贡献者

Rachelcall

于06/27/23注册

133 声望

撰写一个指南

徽章: 2

• 
• 

团队

Austin Community College, Team 7-2, Watkins Summer 2023 Austin Community College, Team 7-2, Watkins Summer 2023 的会员

AUSTINCC-WATKINS-SU23S7G2

1 名成员

创作了1篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览