简介

When a car is driven, tires tend to wear unevenly. To extend the life of tires, it is important to rotate the tires every 30,000 miles. This guide will show you how to remove and rotate tires.

工具

配件

无需配件。

  1. Turn car off and remove keys from ignition.
    • Turn car off and remove keys from ignition.

    • Place car in park (automatic) or neutral (manual).

    • Engage parking brake.

  2. Use hydraulic jack on frame of car to raise car.
    • Use hydraulic jack on frame of car to raise car.

    • Place jack head underneath frame of car.

    • Only necessary to jack the car until the wheels are just off the ground.

  3. Place jack stand on frame of car and remove jack.
    • Place jack stand on frame of car and remove jack.

    • Do no work under car supported only by hydraulic jack, serious injury or death may occur.

  4. Turn car off and remove keys from ignition.
    • Turn car off and remove keys from ignition.

    • Place car in park (automatic) or neutral (manual).

    • Engage parking brake.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  6. Use hydraulic jack on frame of car to raise car. Place jack head underneath frame couple (pictured).
    • Use hydraulic jack on frame of car to raise car.

    • Place jack head underneath frame couple (pictured).

    • Only necessary to jack the car until the wheels are just off the ground.

  7. Place jack stand on frame of car and remove jack. Do not work under car supported only by hydraulic jack, serious injury or death may result.
    • Place jack stand on frame of car and remove jack.

    • Do not work under car supported only by hydraulic jack, serious injury or death may result.

  8. Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire. Pull hubcaps away from tires.
    • Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire.

    • Pull hubcaps away from tires.

  9. Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.
    • Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.

  10. Remove tires by pulling directly away from car exposing brake rotors.
    • Remove tires by pulling directly away from car exposing brake rotors.

  11. Swap tires according to diagram.
    • Swap tires according to diagram.

  12. Place tires on axels.
    • Place tires on axels.

    • Hand tighten the lug nuts with narrow end of nut towards car.

    • Finish tightening the lug nuts with 19mm Torque Wrench to a torque of 63 lb*ft.

结论

To reassemble your device, follow these instructions in reverse order.

Garrett Van Ruiten

于2010年10月11日注册

51 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-28, Regan Fall 2010 Cal Poly, Team 3-28, Regan Fall 2010 的会员

CPSU-REGAN-F10S3G28

4 名成员

创作了9篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,333