简介

如果你的主板(或者其他板,HDMI, USB,等等)出现故障并且需要更换它,本指南可以帮到你。注意任何自行更换配件和拆解都会使索尼的质保失效。

卸下主板需要分离处理器及散热片之间原厂的散热胶。在你重新组装你的设备时,需要重新涂抹一层新的散热胶。参考本指南以了解更多。

  1. 将PS4翻转使底面朝上。
    • 将PS4翻转使底面朝上。

    添加评论

  2. 撕除PS4后部的四个封帖。
    • 撕除PS4后部的四个封帖。

    • 移除任何一个封帖将会使你失去索尼的质保。

    添加评论

    • 卸下4颗PS4后部的9mm TR9 内凸梅花螺丝。

    Depending on the model of PS4, (i.e. CHU-1001A vs. CHU-1215A) it may only have the two screws in the center, not the edge ones.

    Sawyer Coe - 回复

    • 保持设备底部朝上,向上抬起设备后侧以卸下底部外壳。

    添加评论

    • 卸下3颗固定电源供应组件的9mm TR9 内凸梅花螺丝。

    • 卸下2颗4mm Phillips #1螺丝。

    添加评论

    • 从电源供应上拔下电源供应的连接器。

    • 抬起电源供应单元以将其从盒子上卸下。

    you need to lift the power board/box up vertically first as there are 2 long prongs extending up into the box. if you try to lift just one end you will bend the prongs.

    pollytintop - 回复

    has anyone used any of these guys, i don't fancy doing it

    http://www.trustedrepairs.co.uk/electron...

    Damian - 回复

    during this step it exposes a black phillips head screw at least on some models(such as mine) this screw mates the metal sandwich around the motherboard together. I was unable to perform step 19 until I released this Black short Phillips screw.

    gfinch1 - 回复

    I just came across this screw at the same time. It is extremely stuck and I'm afraid to strip it. Any ideas?

    Richard Maya -

    The picture shows the power supply connector being removed from the main board instead of the power supply. This conflicts with the instructions which are correct given how it was most likely put together.

    Clay W - 回复

    This is a poor instruction. Obviously you need to lift the psu out first but on my white ps4 it simply won't budge on one side. Now I'm stuck already.

    Rainer De Temple - 回复

    Rainer, look at pollytintop’c comment. Lift vertically and you will get to next step. I used a screwdriver on the side opposite the fan, but I am a savage in many ways. If you insist on treating it delicately a small suction or powerful tape might work.

    We may not all make it back. Good luck

    Mello - 回复

    Guten Tag,

    an dem Mainboard meiner PS4 ist die Buchse mit den Metallstücken drin, wo man den Stecker des Netzteils reinsteckt, abgebrochen. Als ich das Netzteil rausnehmen wollte, habe ich viel zu fest gezogen und nun ist es ab.

    Bilder: https://imgur.com/a/hIMeWTh

    Welche Methoden gäbe es dieses Problem zu beheben?

    Mit freundlichen Grüßen

    JotEssYT - 回复

    • 向下按压金属释放条,并小心地拉出扁平线缆以从光驱上断开扁平线缆的连接。这不需要用很大力。

    • 从主板上断开线缆另一端;请确认向下按压了金属释放条,并小心地拉出扁平线缆。

    If your PS4 eject button doesn’t respond/work and it doesn’t accept discs ( it doesn’t beep or nothing happens when you touch the eject button and it doesn’t make noise when you try to put a disc in and doesn’t take it) it could be because you took the wire ribbon out the optical drive or motherboard the wrong way and did not press down on the metal tab. ( like I did ) the wire ribbon should have these tiny “wings” on both sides and on both ends. Easy and very cheap fix. Ordered a new ribbon wire on amazon for $12!!! Better then buying a new PS4!!!!

    manny730 - 回复

    Any way to get one of those wings out ? One of them broke off as I was pulling the cable out and is stuck.

    Luke Griffiths -

    Attention, pour sortir la nappe de connection du lecteur optique, il faut appuyer sur la lame métallique du connecteur avant de tirer sur la nappe, c’est un verrou.

    LOPAT - 回复

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • 从主板上拔下光驱线。

    添加评论

    • 从主板上拔下WIFI线。

    添加评论

    • 卸下4颗9mm TR9 内凸梅花螺丝。

    • 卸下5mm Phillips #1螺丝。

    Mine on the bottom right near the board was a 5mm Phillips #1 instead of the expected 9mm Torx screw. Also, I have a shield plate covering my (or my customer's) board here.

    CPR Matthews, NC - 回复

    Mine is the same

    Jesse King - 回复

    • 卸下WIFI天线。

    添加评论

    • 向上抬起并卸下光驱。

    添加评论

    • 将设备翻转并卸下左侧顶盖。(按压向外推然后向上抬即可将其卸下。)

    添加评论

    • 卸下两颗9mm TR9内凸梅花螺丝。

    • 卸下5mm Phillips #1螺丝。

    添加评论

    • 抽出并卸下硬盘盒。

    添加评论

    • 向上抬起顶盖的前部并向向后滑动。

    my right corner, by the ps4 logo, was VERY snug, it took me a few minutes to pop that corner off, took a decent amount of force to pop it off

    theyoonion - 回复

    • 卸下12颗9mm TR9内凸梅花螺丝。

    添加评论

    • 卸下2颗9mm Phillips head #1 螺丝。

    • 卸下金属支架。

    Danach muss auf der Innenseite noch eine schwarze Schraube gelöst werden, sonst kann man die Abdeckung und auch nicht Mainboard lösen.

    Maik Heidemann - 回复

    • 向上抬起并卸下金属屏蔽盖。

    On some PS4 consoles there is a small black Phillips head screw under the PSU securing the metal cover to the midframe of the console. If you do not remove this screw you will not be able to remove the metal cover, and run the risk of damaging it, or the motherboard.

    Jordan Troxel - 回复

    • 从主板上小心向上撬动并拔下三线插头。

    What can i do if i broke these three little prongs?

    Josh Turner - 回复

    2 options 1 make a new contact, 2 buy a New fan as it is The fan contact ;)

    Karl eriksson -

    Which kind of connector is this?

    robbitara - 回复

    Hab meine Halterung auch Abgebrochen.

    Das Komplette “ding” ist vom Mainboard/PCB Abgebrochen…

    Was kann man tun?

    Cem Ce - 回复

    I accidentally pulled the little red cord out from the white casings. Can I shove it back or do I need a new fan?

    Hobocop - 回复

    • 抬起并卸下主板。

    • 卸下主板需要分离处理器及散热片之间原厂的散热胶。在你重新组装你的设备时,需要重装一层新的散热胶。参考本指南以了解更多。

    Unfortunately it costs more for the motherboard and optical drive together than it costs for a new PS4 1TB with a game

    Blake Hannan - 回复

结论

参照下列步骤的相反顺序重新安装你的设备。

114等其他人完成本指南。

特别感谢这些译者︰

100%

这些翻译人员帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

Robert Harvey

于2014年04月01日注册

7,075 信誉积分

创作了5篇指南

团队

Cal Poly, Team 8-12, Regan Spring 2014 Cal Poly, Team 8-12, Regan Spring 2014 的会员

CPSU-REGAN-S14S8G12

5 名成员

创作了30篇指南

Regarding the three wire plug in step 20 - is there a good way to repair this piece if, say, you pulled the wires out of the connector by accident? is there a place to get a replacement part?

Ryan Statz - 回复

how would i know which mother board and paired optical drive is compatible with my ps4 model?

chandra sekhar - 回复

I have tried to replace the hdmi port however being somewhat of an idiot I slipped and knocked off onto the little black squares just behind the port on the left hand side. Does anyone know what these are?

Geoff Parker - 回复

contacts of the motherboard

lillarrypimp1993 -

You may be talking about capacitors that are critically important for the unit to function.

South30 -

Ok so I was taking mine apart, and while I was separating the ribbon wire from the optical drive during step 7, I broke the top off the connector by accident. I thought I could fix it with hot glue, but my ps4 doesn't read disks (at all, doesn't even know there's a disk in the drive). Is there a way to repair this without getting a new drive?

jonathanhart54 - 回复

when I bought the replacement motherboard and optical drive and installed everything, I got a message saying connect USB with software update. Is this because I'm using my original hdd from my original mobo+ optical drive that is different from the hdd my replacement parts came with?

Quaymetsu - 回复

Could you please tell me where you bought a replacement motherboard from as i've been looking everywhere!?

Roger flaps -

Does your blu-ray drive still work on the new motherboard? I seem to recall on the PS3 that the blu-ray drive was tied to a console, I assume you had to reformat the HDD also?

Andrew Fox - 回复

Am I able to buy just the motherboard without buying the optical driver? and if so or not how will I know which one to buy?

Jeff deem - 回复

Cómo saber que tarjeta es la indicada

Oscar Mora - 回复

Es q tengo una ps4 slim y la tarjeta está dañada pero nose cual es la indicada xq trae unos números y nose si afecta en algo

Oscar Mora - 回复

Por favor la respuesta a mi correo gracias :: oscardanilo1724@gmail.com

Oscar Mora - 回复

Desarme la ps4 la limpie arme y andaba…resultado que cuando saque la fuente de alimentación desconecte un pin que que está en la placa base es blanco con unas fichas lo solde e igual no funciona …le pasa corriente pero muy poca que puede ser ayudaaaa

pablolopez 19 - 回复

Pablolopez1095@gmail.com ayuda …es mi correo alguna

pablolopez 19 - 回复

Boa tarde, meu playstation 4 não consigo conectar os controles nas portas USB, ambas não funcionam, já utilizei um teste de porta USB, ambas não funcionam, alguém tem uma ideia?

medron - 回复

Brought a used ps4 any idea how to remove the ribbon port of the motherboad step by step to replace. Someone put crazy glue on it..

Ramon Camacho - 回复

im thinking of running for president

Zany Boy - 回复

Thanks for this informative post <a href="http://www.buyplaystation.com/">buyplaystation.com</a>

buyplaystation - 回复

You cannot just replace the motherboard on a PS4. The motherboard is married to the logic board on the blu-ray drive. Swapping the motherboard without carrying over the original logic board will render the drive useless.

Will - 回复

I ordered a new HDMI port because it was just a black screen but the receivers on the motherboard are worn down, what should I do

Josh coates - 回复

Hi Iwas cleaning my ps4 and pull the power connection and it is lose I bought another ps4 and tried to put my hard drive in the new one but doesn’t work. Somebody can help me. It’s posible just to change the mother board I have a lot of games there. Thanks

Josue hernandez - 回复

添加评论

浏览统计数据:

过去的24小时: 106

过去的7天: 714

过去的30天: 3,349

总计 133,027