简介
使用本指南卸下或更换 Huawei Mate 20 Pro 中的子板护盖。
打开华为Mate 20 Pro将``损坏设备上的防水密封''。如果你不更换粘性密封圈,则手机将正常运行,但会失去防水功能。
重新组装设备时,你需要更换粘合剂来重新连接组件。
你所需要的
要重新组装设备,请按照相反的顺序进行操作。用异丙醇(> 90%)清洁相关区域后,如有必要,请应用新的粘合剂。
将你的电子垃圾带到R2或e-Stewards认证回收商。
维修没有按计划进行吗?请查看我们的论坛以获取故障排除帮助。
要重新组装设备,请按照相反的顺序进行操作。用异丙醇(> 90%)清洁相关区域后,如有必要,请应用新的粘合剂。
将你的电子垃圾带到R2或e-Stewards认证回收商。
维修没有按计划进行吗?请查看我们的论坛以获取故障排除帮助。
另外一个人完成了本指南。
由衷感谢以下译者:
100%
Yuting Zhao正在帮助我们修复这个世界! 您也想加入吗?
开始翻译 ›
一条评论
Hi there.... My huawei mate 20 pro was water damaged!!! After a while its LCD was displaying green lines and in no time it went blank, but surprisingly the phone works and still receives notifications and incoming calls. I could even answer calls in a blank screen by pretending to swipe as if its on. My question before i buy a replacement screen . Is the LCD really damaged or its the logic board ? This might help me decide on how to proceed with it.