TSB# 15-01-022
Technical Service Bulletin
GROUP
NUMBER
CAMPAIGN
15-01-022-1
DATE
MODEL(S)
APRIL 2015
SONATA (LF) 2.0T/2.4L
E - C V V T SEAL SEATING (SERVICE CAMPAIGN TX3)
SUBJECT:
This TSB supersedes TSB# 15-01-022 to revise the service procedure to clarify the steps to access the E-CVVT area.
IMPORTANT
DEALER STOCK ONLY
Dealers must perform this Service Campaign on all affected vehicles prior to customer retail delivery.
When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty Vehicle Information" screen via WEBDCS to identify open Campaigns.
Description: On certain 2015 SONATA (LF) vehicles equipped with 2.0T and 2.4L GDI engines, the 'Check Engine Light' may illuminate with DTC P0010 (Intake Camshaft Position Actuator Circuit) stored in the ECM. This condition may be due to incomplete seating of the internal oil seal plug at the intake camshaft E-CVVT (Electronic-Continuously Variable Valve Timing) actuator.
The vehicle may also exhibit one or more of the following conditions:
- Target engine idle speed is elevated to 1,200-1,400 RPM
- Hesitation and/or slight reduction in power during acceleration
Follow the procedure outlined in this bulletin to seat the seal plug of the intake camshaft E-CVVT.
Applicable Vehicles:
- Certain 2015MY Sonata (LF) equipped with 2.0T or 2.4L engines
Parts Information: No new parts required for this service procedure.
E-CVVT SEAL SEATING (SERVICE CAMPAIGN TX3) SUBJECT:
SST Information:
| Description | Tool Part # |
|---|---|
| E-CVVT Seal Installation Tool | 09243-C1000 |
Table Caption: This table lists an E-CVVT Seal Installation Tool with the part number 09243-C1000.
NOTE: Special Tool SST 09243-C1000 has been previously shipped to all Dealers as a Required Special Tool. Dealers who wish to order additional or replacement tools may do so through the Hyundai Dealer Tool Program. (1-866-539-4248).
Warranty Information:
| Op. Code | Operation | Op. Time |
|---|---|---|
| 50CA04R0 | E-CVVT Seal Seating | 0.3 M/H |
Table Caption: This table details an operation: E-CVVT Seal Seating, with the opcode 50CA04R0, and specifies its operational time as 0.3 Man-Hours per unit.
NOTE:
Submit Claim on Campaign Claim Entry Screen
Service Procedure:
- Remove the engine cover and support the weight of the engine at the lifting bracket eyelet (A).
NOTICE
Attach the engine support fixture SST (or equivalent) as shown in the picture on the right.
Alternatively, the engine can be supported from underneath
