跳转到主内容

iPhone 3G是第二代iPhone。型号A1241,有8或16 GB容量,和炫酷的黑色或洁白的白色塑料背面。修复比第一款iPhone更简单。需要螺丝刀、撬撬工具和吸尘工具。

1197 个问题 查看全部

Replaced front panel, last 2 screws left then screen when black!

I was finishing a front panel repair and down to the last two screws on the outside to close everything up. I clicked the home key to check for working, it was and I slide the bar across, Yea!

So I put the two remaining screws in and pulled off the front protective film and then their was a black screen with nothing. nada. black.

None of my attempts at the "top button and home key" could get anything. No response. I did a careful repair taking my time and watching a few videos before I did it myself.

So basically one minute it is working and the next its dead. I have also put it on the charger for a few hours, because it did have a low battery, but still nothing. Checked the 3 connections again, still nothing.

Any advise, fix, or next step??

Thanks-M

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

2个回答

最有帮助的答案

This is what i would suggest.

Take it apart, down to removing the logic board. Sometimes when you recontact the logic board and the battery it seems to work.

I wouldnt advise it but you could just remove the four screws on the right side of the logic board and then tilt it off the battery connector leads in order to recontact the logic board. I wouldn't advise it because you could bend or snap your board, but this is the way i did it.

Sometimes its not the front assembly ribbons but the other ribbons or the contact between the board and battery.

If that does not work let me know and i will suggest another way.

这个答案有帮助吗?

得分 1
添加一条评论

Thanks for your reply. My screen now works! But...now my home button doesn't. I'm getting there...

这个答案有帮助吗?

得分 0

评论:

For the home button to work, the glass front needs to be fully flush with the bezel. Then it will work.

完成的

添加一条评论

添加你的答案

melissaeubanks 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 867