第四代iPhone。维修过程直观易懂,但前置玻璃和LCD面板无法分开,只能作为同一零件更换。GSM版本, 8, 16, or 32 GB 容量 / 型号 A1332 / 黑色或白色

3252 个问题 查看全部

Won't recognize charging cable.

My iPhone 4 recently stopped recognizing the charging cable. I have tried this on the wall charger and through my computer and still nothing. It won't turn on at all because the battery is fully dead but if you hold home and the power button it will flash the charging sign. I don't know if this is a battery issue or a charging assembly problem or a bad dock connector. I am fully prepared to buy the parts necessary but would just like to figure it what is exactly needed. Ay help would be great.

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 2

评论:

I forgot to mentioning had done the cable swaps and ad wall charger swaps in the info. I took to the apple store and of course the "genius" gave me the run around and checked it saying you can't fix it.... But they cleaned it too. So I guess I'll be ordering the dock connector! Thx for the help.

Thank you for accepting my answer. A new dock connector should resolve the issue, if nothing else happened to your iPhone :-)

添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

3个回答

已选择的解决方案

Jordan, the first thing I suggest to do is to change the cable itself. Use one the is a known good working one. then use a known good working AC adapter and see what happens. Clean your dock connector, make sure there are no broken, bend, corroded pins, and that there is no debris is the connector. Clean it with some isopropyl alcohol and a couple of shots of compressed air. If none of that makes any difference, replace your dock connector. Follow this guide to change the connector. Make sure that you check your phone after each part your replace or repair. Biggest issue is that we all do to much at once and then get lost in our own repairs. Hope this helps, good luck.

这个答案有帮助吗?

按维修分数 1
添加一条评论

GET an inline voltage / amp meter....If you plug in a cord with nothing attached and it shows a current draw it is shorted out.

if plugged into phone and meter it should show a amperage draw. if not there is a broken wire.

这个答案有帮助吗?

按维修分数 1
添加一条评论

Hey there, i had the same problem before, i tried everthing, change the wall connector, the wire and so on. But then i found a hammer. I smashed the phone and now everything is working correctly. I can't call, text or turn it on. I was so happy i fixed my phone. You are very welcome my friend!

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Jordan 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 11

过去的30天: 34

总计 21,710