Changed antenna and now display is only grey

Question

iPhone 3GS

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 个问题查看全部

问题已关闭

Scali @scali98505

声誉积分: 9

2

3

发帖于: 2012年7月1日

更多选项

Changed antenna and now display is only grey

hi, I changed my antenna and now my display is only grey.... the phone itself works because when I charge it I can hear that I put the charging cable in.....

I think I don't have damaged anything because I often open an iphone...

Does anybody know which problem it could be??

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

I checked everything and all is fine... I put it into dfu mode and restored it and now the display is white, once it had a lot of coloured stripes, but now its only white.... Is it the diplay or any other problem??

And can I make sure that the iphone is OFF, without display?

Best regards

由 Scali 完成的 2012年7月2日

添加一条评论

1个答案

I checked everything and all is fine... I put it into dfu mode and restored it and now the display is white, once it had a lot of coloured stripes, but now its only white.... Is it the diplay or any other problem??

And can I make sure that the iphone is OFF, without display?

Best regards — Scali

hectordtruong @hectordtruong 声誉积分: 7.4千 15 5 10 · Answer 1 · 2012-07-01T20:26:20-07:00

最有帮助的答案

hectordtruong @hectordtruong

声誉积分: 7.4千

15

5

10

发帖于: 2012年7月1日

更多选项

If the display is grey, then you put the LCD connector on wrong, or damaged the LCD. Open it up again and check the connectors, make sure the connector clicks in. Make sure the phone is OFF when doing so.

这个答案有帮助吗？

是否

得分 1

添加一条评论