跳转到主内容

第四代iPhone。维修过程直观易懂,但前置玻璃和LCD面板无法分开,只能作为同一零件更换。GSM版本, 8, 16, or 32 GB 容量 / 型号 A1332 / 黑色或白色

2375 个问题 查看全部

Battery wont charge after replacing

Have a iPhone4 that has been swimming in the water. After that the battery was charging very slowly and the camera aint working properly. The battery does charge but goes slow and the iPhone gets very warm.

So replaced the battery with an Original Apple. Iphone goes on everything like it shoud be. When plugging it into the charger is shows the charging sign, but in fact it aint charging at all. A strange thing about the battery is that the hole for the screw wasn't on the right place as well. So i coudnt screw it thight. Where to look in this case? a faulty battery, problem with dock connector or another part maybe?

Any suggestions are highly apreciated.

Thank you.

Update

it was the battery itself, besides the battery the camera and the earspeaker have been replaced, everything up and running again.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
1条评论

i already orderd a new one, i hope this solves the mistery.

完成的

添加一条评论

3个答案

已选择的解决方案

try it to replace another battery???

这个答案有帮助吗?

得分 0
添加一条评论
最有帮助的答案

Sounds like you have the wrong battery.

这个答案有帮助吗?

得分 1
添加一条评论

In the best case scenario, you have a non-original or faulty battery and your iPhone is rejecting it. (hope this is the case)

In the worst case scenario, the water has corroded the terminals on the battery connector of the logic board. In which case, you should either get the battery connector repaired or even replace the entire logic board. (expensive)

Your best bet is to try using the battery you just ordered and see how things work out. Hopefully it's just the battery that's problematic.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Jordy 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,150