声誉积分: 22
3
1
I have a switch pro controller that had a battery die in it after many years (the battery puffed up). I bought a third party replacement since that was all that was available in my country, but this battery has also died after the first time recharging it. I think there's a problem with my pro controller's charging circuit. Any videos or guides on how to diagnose the board?
声誉积分: 43.2千
29
55
42
Before going the board route I would verify that the USB C port looks okay. Admittedly that is also on the board, but it may be that there is some minor damage in the port, a pin that is bent and
Also could be the replacement battery is faulty. The other battery being puffed up may have been a factor of many things. That’s not so unusual after a lot of use, or overcharging. But you’re right it could also be a fault with the board. I am not super familiar with these (it’s been long on my agenda), but I can see if I can find some decent enough images to get an idea. On a road trip at the moment or I would just be tearing mine apart. Because I just like figuring that stuff out.
这个答案有帮助吗？
I replaced the battery again.... and it is now dead. :( I can't source an OEM replacement battery in Canada, so it's possible I just got unlucky with my choice of battery again, but this seems too much of a coincidence.
过去 24 小时： 1
过去 7 天： 6
过去 30 天： 35
总计 263
