iMac 20 late 2006 power on failure

Question

iMac Intel 20" EMC 2105 and 2118

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

212 个问题查看全部

marco @marco10396

声誉积分: 13

1

发帖于: 2012年3月26日

更多选项

iMac 20 late 2006 power on failure

Hi everyone,

I have a question about iMac intel 20 late 2006.

The cap on logic board can make a power on failure?

The display remains black , no sounds, all led on, three diagnostic LEDs and front LED, fan running...

I replace ram, reset the SMC and replace Power Supply from from an other imac , disconnect all device: hd, airport and bluetooth card, Optical Drive, nothing.

I tested Inverter Assembly and LCD...Nothing.

The logical boadr seems to be out of order.

Observing logic boadr I have found some caps, can make a power on failure like imac G5?

Thanks to all.

P.S.

sorry for my bad english :(

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

mayer @mayer

声誉积分: 685.3千

MacHale Enterprises

3.4千

1.1千

2.6千

发帖于: 2012年3月26日

更多选项

Although not nearly as common as the bad caps in the iMac G5s, I've found bad caps in some of the early Intel iMacs. If you find that any of your caps are swollen and/or corroded, your logic board may fail. See if your logic board is the Apple part # 820-1766-A. If so follow this link to get the correct caps: http://jimwarholic.com/2010/02/isight-g5...

这个答案有帮助吗？

是否

得分 2

1条评论:

Thanks mayer, but my imac is INTEL late 2006... I hope that the caps are broken otherwise I cannot repair it.

The problem could be grafic card...

or any other...

由 marco 完成的 2012年3月26日

添加一条评论

Thanks mayer, but my imac is INTEL late 2006... I hope that the caps are broken otherwise I cannot repair it.

The problem could be grafic card...

or any other... — marco

Justin Tapley @justintapley 声誉积分: 1 · Answer 1 · 2018-12-18T19:54:18-07:00

Justin Tapley @justintapley

声誉积分: 1

发帖于: 2018年12月18日

更多选项

I’ve run into a similar problem after a breaker got tripped in my house. I replaced the power supply and conducted the LED test. (NOTE: on my model there are 3 LEDs just to the right of the RAM slots on the logic board.) Everything seems to check out according to the LED indicators however the system will start up, chime and everything, run for maybe 15-20 seconds and then shut off. I’ve done both the SMC and PMU resets but still have the same issue.

Any help on narrowing down what the issue is would be greatly appreciated.

这个答案有帮助吗？

是否

得分 0

1条评论:

It sounds like your HDD failed. I would disconnect the internal drive and plug in a FireWire drive (this series won't boot off of USB)

The other option is to use a second Mac as the boot drive setting it up in Target Disk Mode connecting the two systems via FireWire

Ref:

- Mac startup key combinations

- Understanding the Applications for Target Disk Mode

Given the age of this system I would strongly recommend replacing the PRAM battery as well iMac Intel 20" EMC 2105 and 2118 PRAM Battery Replacement

由 Dan 完成的 2018年12月18日