声誉积分: 1
1
3
Hi,
Everytime I replace a digitizer and/or screen/digitizer on any ipod touch (any gen) the digitizers never go back on 'flush' they always start popping back up usually at the top. It has to be something i'm not doing right. can anyone help me please?
I have included a picture (uploaded to photobucket) so you can see what i mean.
http://i203.photobucket.com/albums/aa159...
Thanks for looking
Aaron
声誉积分: 9.6千
16
15
16
if the adhesive is not holding while drying, Try wrapping the device with a few rubber bands while it drys can help.
if the itouch is not being put together correctly then you can ignore my answer above.
这个答案有帮助吗？
声誉积分: 25
3
1
Make sure you have all the screws in the proper holes, also check and see if the battery might have some air in it and it will push up on the metal shielding. Could also be bent corner or glass still on the sides.
- Lloyd
这个答案有帮助吗？
thanks for the suggestions but none seem to apply in this case. i'm thinking maby the adhesive i use isnt probably too strong. il try some better adhesive and see what happens.
thanks for your reply
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 1,158
2条评论
Did you ever fix this problem? I keep having the same exact thing happen to me. Let me know.
Thanks
Jay
由 Keith 完成的
Yeah, The battery was bulging a bit, so I put a small hole in the sticker of the battery to let the trapped air out.
由 lloyd 完成的