跳转到主内容

Vavle 公司于 2022 年 2 月 25 日发布的游戏掌机。

244 个问题 查看全部

Replace screen without full disassembly?

The iFixit guide on screen replacement implies that you basically have to work from the back, removing parts as you get to the front display: 更换 Steam Deck 的屏幕

However, in the video teardown, they say that you can remove the display without any disassembly by softening the glue and carving it out with a tool: https://www.youtube.com/watch?v=4T0RZ6us...

Is there any written documentation on the latter method or is it really that 'simple'? What are the benefits of going through the whole disassembly process per the written guide?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

4个答案

已选择的解决方案

Because not everyone has a couple of heat guns lying around, lol , and working through the entire device is the only way you can get around that if you don't own a iopener or something equivalent to that.

also because you could damage the device if you just fling the screen off, as you have to remove the cables from the screen, and its easier to access via the back than the front

hope this helps!

这个答案有帮助吗?

得分 2

1条评论:

Second point is fair, but I think you'll still need an iOpener or heat source either way per the documentation (step 27 onwards).

完成的

添加一条评论

To close the loop on this -- I attempted the screen replacement by just removing the front screen. The screen can easily be removed, but unfortunately the ribbon seems to be near impossible to re-seat into the new screen from the front. I ended up doing the full disassembly per the instructions.

这个答案有帮助吗?

得分 1
添加一条评论

The steps requiring access through the back are for two reasons:

  1. To disconnect the battery
  2. To disconnect the display cable

Regardless of the method, you'll need to heat the display adhesive and get at it from the front at some point, like is described in the guides. If you do that first, before going in from the back, you'll have trouble disconnecting the display cable—or at least trouble getting it reconnected on the new display. There's not a lot of slack to work with there. You'll have to go in from the back eventually, and it's ideal to already have the display cable disconnected before removing the screen.

Hope that helps!

这个答案有帮助吗?

得分 1
添加一条评论

Is that connector a 20 pin flat lcd ribbon? Any thoughts on using a extension connector and the push the excess back into the steamdeck so you can enter from the front?

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Derrick N 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 11

总计 245