声誉积分: 25
1
I have a GTX 1050 (not Ti) which is showing blank screen. Looking at the pcb, it looks like some of the resistor/caps smds have been knocked off so any ideas what they could be?
Have attached a very high rez image. Ignore the slight wonkiness as its a stitched together image. Have circled and numbered where I've spotted missing components.
Help appreciated!
声誉积分: 781.3千
1.1千
892
2.3千
@bassquake this is the only info I have based on some old schematic:
1 Capacitor 1uf Package 0402
2 Capacitor 1uf Package 0402
3 Capacitor 1uf Package 0402
4 Capacitor 10uf Package 0603
5 Capacitor 1uf Package 0402
6 Capacitor 22uf measure package looks like a 0603
7 Capacitor 22uf measure package looks like a 0603
8 Capacitor 0.22uf measure package looks like a 0402
I do not have the voltages for the caps, but I would keep it around the 20V range. Get yourself a handful of those and replace them. Not sure where you are, but my preference is mouser.com or digikey.com but it is absolutely up to you.
这个答案有帮助吗？
Nice. Super helpful! Will see if can source them (in UK). I was going to desolder the neighbouring component, test it and use same value but its a bit risky!
Don't suppose you can share the schematic?
Many thanks.
@bassquake I use an online service that allows me to look it up but not to safe etc. I'll see if I can take a screenshot. @tech_ni @strongbow @hellomacos are repairers on your side of the pond. They can likely give you better resources as to where to purchase replacements
@bassquake mouser or digikey
As @tech_ni has said mouser and digi key are good choices
EBay can be used by please compare prices as some sellers can REALLY charge a premium for some components:-)
过去 24 小时： 0
过去 7 天： 3
过去 30 天： 26
总计 391
