修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

Apple Logo Bootloop, no Recovery or DFU, doesn't register any inputs

This iPhone 6 bootloops, takes no button inputs (power or home). Just bootloops until the battery is empty. I'm quite certain it must be a hardware issue, but how do I figure out what's causing it? Dead NAND? No Recovery software, iTunes and DFU works. The home button isn't in the screen frame as that is completely shattered, maybe I'm just $@$* at pressing it outside its mounting position. Any suggestions on what could be wrong, I can microsolder, just need to know what (who would've thought).

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

3个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

possibly a tristar issue

这个答案有帮助吗？

是 否
得分 2

2条评论:

That could make sense, but the phone still charges, gonna give it a try.

由完成的

@Karl Wünsche So the thing about Tristar is, it’s not actually for charging. It’s mostly for USB function, it just gets caught up in the crossfire a lot because it’s what identifies what’s plugged into the lightning port. I’d say tristar is a reasonable start if you’ve already narrowed it down to a board issue.

由完成的

添加一条评论

更多选项

Before jumping straight to a board issue make sure it’s not a bad part. But it into a known good housing, or good parts if you have any. At the very least see what it does when only the essentials are connected (something so you can tell it’s booting and something to prompt it to boot. Usually I just leave the dock flex, display (no front camera) and battery connected and see what it does then.

Could absolutely be a board issue, but lots of things cause bootloop. After doing tristar, that’s where I would check what the power readings look like on DC power supply (assuming you have one and way to connect it to the battery connector on the iPhone board) and/or start diode moding connectors with a multimeter.

这个答案有帮助吗？

是 否
得分 1
添加一条评论

更多选项

Try it without the front camera ribbon connected and plug in the charger before trying to turn it on. Front Camera can cause boot loops but so can a bad battery. You can buy aftermarket home buttons cheap enough. Only function you'll lose is fingerprint id.

这个答案有帮助吗？

是 否
得分 0

1条评论:

Bought a new battery and home button, didn't have the front camera connected. Only logic board, battery, screen and home button, aswell as the charging ribbon.

由完成的

添加一条评论

添加你的答案

Karl Wünsche 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 49