My Fridge temperature is too high.

Hello! By the looks of it errors 7 and 4 were displayed. Should I replace the 2 items or what should I do?

Thanks!

@Razvan Schindea

Before replacing any items you need to check further what the problem is.

Error 4 is a refrigerator fan error i.e. the fan in the refrigerator compartment, not the one in the freezer compartment or near the compressor, but it may not be the fan that is faulty. It could be the power to the fan is not there or perhaps the control board's fan operate circuit is not working.

Error 7 could actually occur as a result of Error 4 so you start with that one first

First check if the fan in the refrigerator compartment is working

Here's the flowchart for the R-fan from the manual

The manual should also show where the main pcb is.

You will need to have a DMM (digital multimeter) and know how to use it to find out what's wrong.

If you don't have one or know how to use it then it is better to get a professional to fix it as replacing parts is expensive when it is the wrong one or if you don't know what you're doing.