修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

iPhone 6 main speaker doesn't work after complete reassembly

Hello. I completly disassembled and assembled my iPhone 6, speaker was working normally, after assembly everything is working normally bud i don't get sound from the speaker. Volume doesn't say headphones so it is not stuck in that mode and i checked resistance on speaker and on the flex cable, both are the same, port looks fine under microscope, is there a possibility that a screw somewhere is different and that can be causing that problem? Thanks in advance

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

Hi

I suggest you clean the speaker contacts with isopropyl alcohol to speak away any dirt our human eyes can’t see

If this doesn’t work try holding the speaker contacts down to make sure it’s not a contact issue

Hopefully this helps

Any questions please ask

Thanks:-)

这个答案有帮助吗？

是 否
得分 0

8条评论:

Haven’t got one of the antenna wires caught under the speaker have you? Stupid question, mute switch on?

由完成的

Thanks for your answer. I did both steps, but sadly it didn’t work. For a short while it was stuck in a headphone mode but when i tried to call and put it on loud speaker, no sound was played. Now im back when it says normal volume but still, doesn’t work.

由完成的

@aricius

Try taking the logicboard out and assembling it without the screw and manually hold the speaker down to make sure there is proper contact :-)

由完成的

@strongbow Hello, antenna wire is not stuck under the speaker, for testing i disconnected it completly and mute is off.

由完成的

显示更多的3条评论

添加一条评论

添加你的答案

Patrik Mesaroš 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 50