跳转到主内容

苹果2019年度的旗舰手机发布于9月20日,该设备配备5.8英寸OLED显示屏、三颗后置摄像头,电池续航能力大幅度的提升。为iPhone XS的后续机型。

75 个问题 查看全部

Face ID not working after changing the screen

Hello, After changing my iphone screen i bought from ifix it the iphone disabled the face iD feature. Also, i replaced my battery with one from ifix it a went settings> about and it says unknown part for both screen and battery

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

3个答案

已选择的解决方案

did you transfer the original front flex this can cause face id issues if its not original or has been damaged, the screen and battery will show unknown part if its not the original part for that phone out of the factory. to fix the screen issue theres a chip on the old screen that needs swapped over to the new screen and pretty much the same for the battery it needs the bms circuit from the old original battery transferred over to the new battery and programmed

这个答案有帮助吗?

得分 0

评论:

The ifix screens already comes with front flex attached and glued. Not sure if i can remove it then place the original one ? For the battery what is the bms circuit?

完成的

@bader7 the bms board is the circuit board that is on the battery that the battery flex is connected too. using a 3rd party front flex will stop face id from working so thats probably your issue there.

完成的

添加一条评论

I had the same problem, I found that after a factory reset via macOS, and updating to iOS it immediately began working.

Hope this Helps :)

这个答案有帮助吗?

得分 0
添加一条评论

It is always best to use a machine like an Apollo to transfer the Data from the Old screen and Battery to the new one. You will also have to reset the battery cycle to zero after transfer.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Bader Alturki 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 5

总计 46