修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部

更多选项

iPhone 6 refuses to turn on

Hello, I have had this iPhone 6 that would randomly just have lines appear on the screen when I reattached the screen cables it seemingly fixed it although a few hours later the phone suffered a small hit and screen started flickering. I reattached the cables but that only made it worse as there were now faint vertical stripes across the screen and touch was half working. I reattached the cables again and then it completely stopped showing anything on the screen and there was no vibration when I flicked the mute switch. Any help will be greatly appreciated.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 1
6条评论

Forgot to mention. I had also cleaned the contacts 2 times with 99% isopropyl alcohol with a toothbrush.

由完成的

Update: The phone has magically came back to life and is now showing the battery flat symbol.

由完成的

Oh well that's good news hopefully it stays that way. I have a lenovo laptop that has really dodgy wifi and bluetooth after driver updates and is never really stable.

由完成的

Update 2: Phone has turned on, had the screen freak out when it passed the apple logo then it started having the touch issues again it started having a strobe effect on the edges of the screen

由完成的

Oof i told u it would never be stable. In all seriousness though this is more than likely a deeper logic board issue.

由完成的

显示更多的1条评论

添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Good morning,

As far as I can tell, you did open the phone.

Let's get to the troubleshooting steps:

  1. Have you tried checking the connections between components such as the battery
  2. Have you connected a charger and/or a charge meter to test if it receives a charge
  3. Have you checked to see if there is a short and subsequently, some smoke.

这个答案有帮助吗？

是 否
得分 0

1条评论:

Yes, I did check the battery connection. I have connected a charger and tried powering on the phone ( still no luck ) I did not test for a short but I’m sure there is no component shorting out as the phone was working before I reconnected the cables also there was no smoke either.

由完成的

添加一条评论

更多选项

Have you replaced the screen on the phone?

I had an iPhone 6 a while back with touch screen sometimes not working and then lines as soon as I disconnected and reconnected the cables. Sometimes no power. Turns out the display was faulty and had something called ghost touch. This was with the original screen, if you have a test screen at all it would be useful trying that one to see if you get the same results.

这个答案有帮助吗？

是 否
得分 0

1条评论:

The screen is perfectly working I had done a logic board swap with the iPhone cause the old logic board was all messed up, had frequent random shutdowns and took about 12 hours plugged for the iPhone to turn on and a new battery didn’t fix. It’s a problem with the new logic I swapped in which must just have like bad solder joints or something.

由完成的

添加一条评论

添加你的答案

Ol’banana chips 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 57