声誉积分: 55
5
2
After replacing the Digitizer & LCD to a customer's iPod Touch 4th Gen, I still get no response from the screen. I know it's not the screen because i swapped out four different Digitizer & LCD screens. The LCD screen lights up. The connector to the Digitizer does not look damaged at all. The broken screen worked just fine before I removed it.
Any ideas?
声誉积分: 369
5
5
It sounds like the the cable connector is not plugged in .
Or the cable itself is damaged even though it looks ok.
Or else you got a bad dig/lcd assembly.
Only thing to do is try a new assembly. Good luck.
One thing eveybody should do is to test it before glueing it down.
这个答案有帮助吗？
I've tried four different screens. Still having the same problem with all four screens. And I did end up putting those four screens in different ipods, and they worked in those.
声誉积分: 369
5
5
The only other assumption is that the connector on the motherboard is broken. Must have gotten damaged while trying to plug it in.
I feel your pain.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 2
总计 594
