跳转到主内容

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

185 个问题 查看全部

Two replacement batteries won't recharge after initial charge. Ideas?

I replaced the battery in my ipad air 2 with a battery from amazon that had overall good reviews. I charged it to 100%, but it drained somewhat quickly from its first charge and then wouldn’t recharge a second time. Plugging in the cable would cause the screen to illuminate momentarily, so you would assume it was charging, but there was no charging icon on the battery icon.

I took out that battery and put in another one. Again, it charged to 100%, but drained fairly quickly and when it got to about 50%, I tried charging it and I got the same result…no charging icon.

Anyone run into this situation before? I did restore the ipad software after each battery replacement Thanks!

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个回答

Hello Jim,

you have a short circuit in the charging system. Take the multimeter in hand and check the resistance values on the charging pins. My guess is you broke the copper pins on the board in the contact port. It happens a lot. You may need to replace the charge control system ic - a short circuit could hurt it.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Jim Banville 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 5