声誉积分: 1
1
The green led comes in then the red led starts to flash 3 time and then continues to flash 3 times. I have turned it off and removed plug and then pushed the off button on the side of the tv for around a minute but it will not reset, I have taken the back off the tv but could not find any burning.
Hope someone can help
声誉积分: 14.9千
26
15
28
Can you check the boards on the TV for any bulged or leaked capacitors? I have attached a picture for reference.
这个答案有帮助吗？
Thank you for your help but all the capacitor look ok so I am still looking to see if anyone knows what board to change as there is only two
@electric151 Can you take a picture of the boards and post them? 在已经存在的问题里加入图片
声誉积分: 781.6千
1.1千
893
2.3千
@electric151 this is a Plasma TV and the 3 blink code error on this model refers to a 3.3V error or the D-board. We will definitely have to see your boards etc. to assist you further. Remember that you can only add pictures etc. to your Question or Answer but you will have to do that in Edit mode.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 40
2条评论
Some how it will not let me post photos as requested but I have been able to post them on this site if you look, sorry for the inconvenience.
Alastair Dunn
由 Alistair Dunn 完成的
Some how it will not let me post your request of photos but have managed to get it on my question about my Panasonic TV if you look, don’t know why I can get it on my reply to you other than I am using a I-Phone
Sorry for the inconvenience
Alastair Dunn
由 Alistair Dunn 完成的