跳转到主内容

The Chevrolet Tahoe (and its rebadged version GMC Yukon) is a full-size SUV from General Motors. Chevrolet and GMC sold two different-sized SUVs under their Blazer/Jimmy model names through the early 1990s.

109 个问题 查看全部

Passlock trouble after putting original ignition switch back on

My keys were taken so I decided to replace my ignition switch and keys. About a week later my keys were returned and since I hadn't bought the new switch yet I put the original one back on. Now when I crank the truck up it will turn but won't stay on. I did the hole 10 min on, 10 sec off thing but still no luck. When I turn the key on the security light no longer lights up. Someone please help me out here.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

There is a short and a long reset procedure for the GM PassLock system. The 10 minute on and 10 seconds off is the short reset and works if there is a minor issue with the system. Replacing the switch probably requires the long reset procedure. The long reset just repeats the short procedure three times. You must do the steps in proper order and on time within a few seconds or you have to start all over from the beginning. This means 30 minutes 30 seconds if you get it all correct. If this doesn’t work, then something may have been disconnected during the changes, everything has to be properly connected and working for the resets to work.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

NatalieTrevino 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 34