can’t plug any charger into port.

Question

iPad Pro 12.9" 2nd gen

41 个问题查看全部

Donna Ornduff @donnaornduff

声誉积分: 1

发帖于: 2021年7月8日

更多选项

can’t plug any charger into port.

My iPad Pro fell off the bed with the charger plugged in, so removed it, it was bent and now can’t plug any charger into port. Must have done something to the inside. And how much would it cost to repair, rough estimate?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

Jesse Hooton @hootonberg 声誉积分: 11.4千 Mobile Device E.R. 7 5 1 · Answer 1 · 2021-07-08T13:13:23-07:00

最有帮助的答案

Jesse Hooton @hootonberg

声誉积分: 11.4千

Mobile Device E.R.

7

5

1

发帖于: 2021年7月8日

更多选项

It depends on the model. In some models the port is soldered to the main logic board and in others it's on a separate daughter board. Call around your local repair shops to get some estimates. If it is soldered to the board, I recommend you contact either iPad Rehab, STS Telecom, Rossmann Repair, or VCC Board Repair and they should be able to give you an estimate.

这个答案有帮助吗？

是否

得分 1

添加一条评论

iPad Pro 12.9" 2nd gen

can’t plug any charger into port.

1个答案

添加你的答案