跳转到主内容

Battery charge level not changing after replacement.

I decided to replace the battery in my Lenovo android tablet. I obtained one through Amazon and carefully installed it. It seemed to work fine, but the charge level never seemed to change from 57% if it was in use or on charge. Eventually it just died and I could not get any response from my tablet (even on charge).

I replaced the battery with my original one and that is now behaving in the same way - but permanently showing 50%.

Yes it was working fine before (though needed recharging every couple of hours).

And yes I have done a factory reset- still saying 50%

I have cleaned and carefully checked the battery contacts, and ensured the connector is fully engaged.

Any suggestions?

Most googling comes up suggesting the micro USB port is faulty - but this would not explain why the level indicator does not go down from 50% when in use!

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

Try checking the health of your battery with the AccuBattery app at https://play.google.com/store/apps/detai...

See if there are any pending software updates for the tablet, as well.

If AccuBattery reports that your battery is fine, and your software is up-to-date, then try changing your charging cable first, then the charging port.

这个答案有帮助吗?

得分 0

1条评论:

Yes I tried Accubattery. I was using it before and it is why I decided to change the battery (it claimed the original battery was down to 36% capacity). However it now won't work - claiming that it cannot measure the current! It reports 0ma usage even when it is being used. I think this is more than just a charging problem, though the tablet seems to be working fine it seems not to be able to monitor current flow.

Another detail - with the charger plugged in it has the charging graphic but the red light is on (previously only on when battery was virtually dead) and it remains at 50%.

完成的

添加一条评论

添加你的答案

Peter Chleboun 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 3

总计 78