修复你的物品 社区 商店

第六代 iPad 发布于2018年3月。拥有无线局域网和无线局域网＋蜂窝网络机型，32GB 和 128GB 两种储存容量可供选择。配备了 9.7 寸的 Retina 视网膜显示屏和 64 位架构的 A10 Fusion 芯片。

221 个问题 查看全部

更多选项

iPad 6 not turning on after screen replacement, overheating?

Using a new heat mat for iPad repairs. The iPad was charged to 30% power.

placed iPad on the heat mat for ten minutes at 60c back and then front.

iPad screen came away like normal , removed screws, removed digitizer and lcd ( screwdriver dropped on lcd without signs of physical damage), cleaned frame.

replaced digitizer and lcd attempt power on no results. Tried replacement lcd and iPad failed to power on.

completed an iPad 8 the same way and was fine. This iPad did it over heat ? Trying to find some answer for what I missed

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

You shouldn’t need to heat up the back of the ipad to soften the adhesive on the screen, at least in my experience. You may have overheated and damaged the battery or the board as I believe they’re not meant to be exposed to temps higher than 120F (48.9C). If you have a USB amp meter, connect that to the iPad to see if it draws any current. If it draws 0.10 amps or more then it could be a sign that the iPad is booting up and an indication that there’s something wrong with the LCD. It will jump up and down as it’s booting which is normal. But if it hangs below 0.10 for a while or if it drops to 0.00 and comes back up then it’s most likely boot looping.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

Paul Mitchell 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 24