Sanyo FW42D25T HDTV says "weak or no signal detected"
This TV used to display channels just fine. Now all of sudden it won’t display ANY. So I re-did the auto-scan and re-detected 46 channels. None display. All produce the "weak or no signal detected". I hit reset twice which auto-scanned and again found 46 channels. Still: "weak or no signal detected" for all. I took the cable that normally runs from the antenna to my HD-HomeRun device on my PC. I know this cable works because my PC displays live TV just fine ON THIS TV. So the Sanyo TV has video, it can display a TV signal that is received via a third party device and sent along to it via HDMI. But when I switch the INPUT from HDMI to TV it cannot or will not interpret and display a TV signal that it receives via its own ANTENNA jack. It can DETECT the channels, just not display them.
2条评论
My tv won't scan any channels and when pick channels it's not many could it be my antenna
由 Ronald Spikes 完成的
Do need a new antenna
由 Ronald Spikes 完成的