声誉积分: 1
1
Hello all,
I installed an SSD into the machine, and it went fantastic. The computer starts up, really quickly and runs excellently. Until… the system seems to freeze but the mouse is movable. Just can’t click on anything.
Occasionally, if I leave it on and walk away, the screen has a red “filter” on it.
If i restart the machine it starts back up and works great, until it freezes.
Any thoughts?
声誉积分: 479千
35
329
970
Sadly, this SSD is too fast for your system, its a Fixed SATA III (6.0 Gb/s) your system requires a SSD which can run at SATA II (3.0 Gb/s).
Some SSD’s are Auto Sense similar to how Ethernet 10 & 100 mbps systems, hubs & switches work. Here the drive matches the systems SATA I/O speed.
You’ll need a SSD similar to this one Samsung 860 EVO
Note how the interface line lists all of the SATA interfaces: SATA 6 Gbps Interface, compatible with SATA 3 Gbps & 1.5 Gbps interfaces
The Crucial MX500 SSD only offers the one I/O speed as you can see here Crucial MX500 Technincal Details
So any SSD you put in that doesn’t list SATA II (3.0 Gb/s) it won’t work reliably. Sorry ;-{
这个答案有帮助吗？
Thank you for the reply. It makes very little sense to me that iFixit recommended that drive in this case.
@brett collins - Sadly, I had notified them of the issue a few years ago. With others who had the same issue ;-{
What makes the issue madding is it can appear to work and then you get into hangs and crashes. This gets into the max performance of the SSD (burst) some older slower drives will appear to be fine until you load them up then the housekeeping processes kick in knocking your system silly!
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 31
2条评论
What is the make and model of the SSD you put in?
由 Dan 完成的
The recommended one from iFixit. iMac Intel 20" and 24" (Mid 2007-Early 2009) SSD Upgrade Kit
由 brett collins 完成的