How do I troubleshoot disappearing picture on my TV?

Question

Philips Television

Repair guides and support for your Philips TV.

241 个问题查看全部

Paul @p_aul

声誉积分: 13

1

发帖于: 2021年1月2日

更多选项

How do I troubleshoot disappearing picture on my TV?

TV is Philips, Model No.: 50PFL3008H/12

When I turn my TV on I get sound and picture no problem. However after about 10 minutes the picture disappears. When I shine a flashlight on the screen I can see silhouettes. I don’t understand why does it happen after some time of running. Any Idea?

What also worries me is the power board. I can hear quite annoying high-pitch buzzing and right above it there is a black ‘trail’ from heat, I assume. This is my first open TV so I have no idea if it’s normal or not.

What I would like to find out is how do I determine what is the issue causing the picture to disappear and is the power board ok?

Thanks

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

1个答案

已选择的解决方案

mike @aactech

声誉积分: 28.4千

9

13

64

发帖于: 2021年1月2日

更多选项

Replace the board unless you have some circuit board repair experience. Here’s one possible source:

https://www.televizyonkarti.net/171ps20p...

Schematics:

https://electronicshelponline.blogspot.c...

Most of the searches bring up the Vestel 171ps20 but not the Vestel 171ps20p.

“P” for Philips?

这个答案有帮助吗？

是否

得分 1

2条评论:

Do you think it could potentially cause the disappearing picture? Due to overheating it doesn't provide enough power to the backlight or something like that?

由 Paul 完成的 2021年1月4日

@p_aul

TV's are not my area of expertise but yes that power board looks defective.

It is burnt! You get burns marks or leakage because a component has overheated to the point of burning out.

Now the part shown in your photo may have other related failed components associated with it.

Unless you know what you are doing reading the schematic just replace the whole board.

由 mike 完成的 2021年1月4日

添加一条评论

Do you think it could potentially cause the disappearing picture? Due to overheating it doesn't provide enough power to the backlight or something like that? — Paul
@p_aul

TV's are not my area of expertise but yes that power board looks defective.

It is burnt! You get burns marks or leakage because a component has overheated to the point of burning out.

Now the part shown in your photo may have other related failed components associated with it.

Unless you know what you are doing reading the schematic just replace the whole board. — mike

Philips Television

How do I troubleshoot disappearing picture on my TV?

1个答案

添加你的答案