声誉积分: 369
10
2
1
Screen wont turn on after a screw got pinched in display, but the device still turns on like u can hear it but it wont turn on screen wise, this was after a replacement screen, so i tested the original screen again to make sure i didnt fry anything and the original screen still works, can really a little dent prevent the screen from turning on. heres a picture of the damage
its a 2017 macbook pro 13inch'
声誉积分: 781.5千
1.1千
893
2.3千
@zmentz it all depends on where it got damaged and what parts got shorted out. Size of the damage does not matter, location most certainly does. Since your old screen works etc. it is definitely your display that got shorted out.
@zmentz it’s on the top site. The fuse is a 3Amp 32Volt fuse in a 0603 package.
这个答案有帮助吗？
now all the sudden the original one wont work now, i dunno what happened
@zmentz now it gets interesting. What happens now? Your MBP comes on? Checked the backlight? What exact model/year etc.is your MBP
2017 13" macbook pro
@oldturkey03 so i want to check the backlight fuse becasue i was mistaken and it is not working because if i shine a light into the back of the screen i get a display so is the fuse on the top or bottom of the board?
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 78
3条评论
anyone have any ideas
由 Zach Mentz 完成的
@zmentz your MBP a A1708/EMC 3164 or a A1706 / EMC 3071? We need to know this so we can identify to right components for you. Do you have your logic board out? If so post some good top and bottom pictures of it with your QUESTION. 在已经存在的问题里加入图片
由 oldturkey03 完成的
@oldturkey03 ok will do, one question also is the backlight fuse on the bottom or top and its also the a1708, and i will send the pictures tomorrow because im currently not in work today
由 Zach Mentz 完成的