跳转到主内容

修复你的物品

维修的权力

商店

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

83 个问题 查看全部

Full screen static after display replacement

Anyone seen this before? It’s new to me.

Block Image

The entire screen is scrambled gray and rapidly flashes about half of the screen as shown in the screenshot from a video I took. This is the second display from the same vendor that I’ve installed in this ipad and both produce this static-like image. If I re-install the broken LCD, I can see the image clearly (as clear as possible on a broken display). There are no signs of static on the original.

I’m concerned that I’ve received two defective replacement panels, but it feels unlikely. Again, I’ve never seen this behavior before in a replacement panel.

Any ideas or thoughts? Thanks!

Edit: I forgot to mention that I did see one similar post from searching and they were successful by performing a DFU reset. I went ahead and tried it, but the issue persists.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

Essential 工具包

我们最紧凑的套装中最有用的工具。

现在开始购物

Essential 工具包

我们最紧凑的套装中最有用的工具。

现在开始购物

2个回答

Apparently, I cannot read. The LCD panel I was using as a replacement was for A1823 and I’m working on an A1893. Whoops!

这个答案有帮助吗?

得分 0
添加一条评论

When you close the screen use a cloth to remove static but this may not resolve the issue if the LCD you got is broken.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Christopher Stout 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 18