跳转到主内容

24英寸显示器,内置iSight 摄像头,麦克风和扬声器。 1920*1200分辨率。 发布于2008年10月 型号为A1267

84 个问题 查看全部

No image, no detection from laptops, but USB/Speaker/iSight all works

Got no images nor it can be detected by either MacBook Pro or PC laptops, but speakers, USB ports and iSight camera works fine. Replaced with the logic board recently(bought over eBay), but has the same result.

Any thoughts what could be wrong?

Many thanks!

Alex

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

3个答案

最有帮助的答案

Time to replace the display assembly then.

这个答案有帮助吗?

得分 1

6条评论:

Hi Dan, do you mean the display screen assembly itself is bad? And nothing to do with its cables, etc.?

完成的

I don't see any other answer.

完成的

OK, thanks again Dan!

完成的

By the way, Dan, do you know the part number if I go ahead to replace the display assembly?

完成的

显示更多的1条评论

添加一条评论

Would it be possible to connect it to monitor?

这个答案有帮助吗?

得分 0

1条评论:

What do you mean connecting it to a monitor?

完成的

添加一条评论

My thought process leads me to think thst the problem is within the display either at the pin or the port, the odds of you getting a board with the same problems is not entirely unheard of but chances are its gotta be on the display or the cable , but i dont exactly know, especially when it comes to apple :| i wouldn't run anything past them. But that's just my opinion, If anything whatever tools you do have at hand that can check the tolerances of or what is expected in voltage or power that the parts are reciving the given amount of power theyre supposed to, if not handy id recommend snagging one for the future since it will help diagnose if the problem is on 1 end or the other? Youd be surprised how far ossiliscopes go, super handy little guys

这个答案有帮助吗?

得分 0

3条评论:

Thanks for your comments.

完成的

@rocingbayelectronics - You raise a good point!

Often I see the connectors and cables damaged when someone has had a hard time opening the system (display here) to service it adding RAM or drives. In a display there just no need to do that.

So unless it was worked on before and the connection slipped off you wouldn't get a blank/black screen.

The other factor is the logic board is what is seen by the other system within its display listing, as we don't see it that aims us to the logic board not the display.

This is a perplexing problem for sure!

完成的

Could it be possible that the all-in-one cable is bad?

完成的

添加一条评论

添加你的答案

Alex 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 109