跳转到主内容

Repair guides and information for Hamilton Beach coffee makers.

27 个问题 查看全部

Fix over-heating power cord on a Hamilton-Beach M/N 40622R Percolator.

The push-in style power cord for my Hamilton-Beach M/N 40622R gets worn very easily and will not pass electricity to the percolator, becomes unbearably hot…or both. It appears the inside of the plug and the contacts on the pot become corroded over time which inhibits electrical contact. The contacts in the plug also become ‘splayed’ out, which also inhibits good electrical contact. I have tried 2 different Percolators, 3 different after-market cords, with little success. They always wear out over time…usually within a couple months. What is the best solution for this problem?

Block Image

Block Image

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

Hi @kronological ,

I think that perhaps you should change to a cordless base type percolator as you seem to be having problems with the corded type (you did say that you have tried 2 different percolators, presumably they were of the same corded connection type).

This is not a recommendation, merely an example to show what I mean by cordless.

Here’s an image taken from the link that shows it better.

Block Image

(click on image to enlarge for better viewing)

这个答案有帮助吗?

得分 0
添加一条评论

I have both a Hamilton Beach percolator, and a Farberware percolator. The cords to both were getting quite warm, and got hotter when they would switch to the keep hot setting. I bought a universal cord, which fits both units, and was quite a bit longer in length. Even the brand new cord is getting a bit hot. I've taken to keeping a close eye on the percolators, while using them, and after filling my cup a couple of times, I unplug it. Both percolators make excellent coffee, but I'm still going to keep an eye on them while they're being used...

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Esteban Suerte 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 6

过去 30 天: 22

总计 832