跳转到主内容

发布于2018年9月21日,型号为A1921,A2101,A2102,A2104。支持GSM,CDMA / eSIM或 nano-SIM / 拥有64,256或512GB容量可选 / 有银色、金色、深空灰可选。(读作iPhone 10XS Max)

374 个问题 查看全部

Bottom Pentalobe Screws Stuck

Hey guys, I have an iPhone Xs Max that’s having an issue with the bottom screws. They aren’t stripped but the problem is they don’t turn AT ALL. Because I had to open the phone because the old screen was completely dead I just broke the old screen off. The problem is even when I tried pushing them out from the inside it didn’t do anything. I’ve been using it for a while with the screen unscrewed but I want to have it secured in at some point. I’ve tried glue on the screwdriver, etc… they aren’t stripped so that isn’t the problem, they’re just really, really stuck. Any information, ideas or solutions would be appreciated. Thanks!

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

3个答案

There are screw lubricants you can find on amazon or you local repair store, relatively cheap.

You can also use cooking oil but beware of residue!!

Works for me (too lazy to buy lubricant when problems occur lol)

Another (riskier) method i’ve seen implemented is warm up the screw with a soldering iron (or similar) so it expands a little. When it cools down it’s a little loosier. If you try this do it with caution, you can permanently damage your device.

这个答案有帮助吗?

得分 0
添加一条评论

my P2 screw is slipping. how to handle this situation

这个答案有帮助吗?

得分 0
添加一条评论

I would just cut them out and get new screws but you might need to push the screwdriver down hard and twist a tiny bit. Lefty loosy

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Jakob 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 3

过去 30 天: 7

总计 370