跳转到主内容

AT&T Corded Answering System with speaker phone, audio assist, digital backlit display, and caller ID/call waiting.

17 个问题 查看全部

Can't Tilt Screen, feels like it will break if I do.

I tried to tilt the screen, but it resists strongly. I fear breaking this fine phone. I pulled it up about as far as I could without breaking something and stuck a piece of wood to hold it there, but that is an unsatisfactory answer. Is there some trick to it?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1

1条评论:

same problem here ... still looking for an answer ....

完成的

添加一条评论

1个答案

Figured out the answer

Inside the phone and behind the display is a V-shaped metal spring which engages with a plastic arm attached to the rear of the display.

When pulling up the display we sometime pull hard and it bends the spring closing the V, and prevents it from stopping on each step of the arm.

Take the back cover off the phone, remove the spring piece (one screw removes it) and open the V back up to like a 60 degree angle. Re-attach the spring and try moving the display. If it still wont move up and down open the metal spring V more until the display moves freely up and down and stops at each step of the plastic arm.

Basic ability to use a screw driver and pliers will fix this for you.

Good luck!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Carl Andren 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 2

总计 129