修复你的物品 社区 商店

A1706/EMC 3071—于2017年6月上市，这台13''MacBook Pro以可升级至3.5Ghz酷睿i7动态超频至4.0GHz的Kaby Lake处理器为特征。

276 个问题 查看全部

更多选项

Mac slow with fan at full blast - SMC sensors issue

Hi, I have a MacBook Pro with classics PFM006 and PPN001 error codes, system slow and fan at full speed.

I have several sensors reading bad values. Different programs read some sensors but not others:

- HWMonitor Official: Heatpipe Incoming and Outgoing Air;

- Different version of HWMonitor: Palm, Touchpad, System Proximity and Ambient;

- iStat Menus: Actuator, Palm Rest and both SSD Proximity.

It’s clear that something is wrong, probably the SMBUS_SMC_3.

I looked at the logic board and I don’t see any sign of oxide, looks perfect to me.

I tried removing the Trackpad because it’s a common cause and of course I had the same symptoms (SMC detect a missing sensor) but all the sensors were like before.

I think if the cause was the trackpad, removing it would mean having only the trackpad sensors reading bad but the others being okay, am I right?


I haven’t look at the voltages yet, what could solve the problem? A SMC reflow or could still be the Trackpad?

The logic board is: 820-00923-A

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Likely the touchpad, people go crazy with the spray cleaners and wet wipes (more so now with COVID-19).

What happens is the liquid seeps into the touchpad logic damaging it.

You need to spray the cloth with the cleaner, then use it to wipe the system down. Don’t use the wet wipes without wringing it out (the dryer the better) or not at all.

这个答案有帮助吗？

是 否
得分 0

3条评论:

Thanks, so you think this is the case even if disconnecting it still show the other sensors as bad?

由完成的

I would just replace it and test again. Sensors are tricky! Unless you know what they go to you can be lead down the wrong path.

Liquid damage could have gone into other areas. So you need to makes a full inspection of the logic board (both sides).

由完成的

Okay, it was the Trackpad. The flat under the battery was slightly sideways. Strange since it’s glued and nobody ever opened it.

So, even if the only trackpad is disconnected every other sensor on the same bus “fail”.

由完成的

添加一条评论

更多选项

Try resetting the SMC by 1. Shut Down your MacBook Pro 2. Hold down the Command, Option, Shift keys, and the Power button ALL TOGETHER AT THE SAME TIME for 10 seconds 3. Release the keys 4. Turn on your MacBook Pro. I hope this helps.

这个答案有帮助吗？

是 否
得分 0

1条评论:

I didn't mention it but that was the first thing I tried.

由完成的

添加一条评论

添加你的答案

Nicola 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 11

总计 876