声誉积分: 11
1
2
声誉积分: 77.1千
337
104
145
it's only stuck on with a bit of double sided adhesive...put your spudger or fingernail under an edge of the part majesty has shown and pull upwards(easily taken off) The metal ring is separate to the glass cover and you'll need to lift that out after..quite flimsy so just go easy.The adhesive on the camera cover is quite sticky and can be reused. the camera cover has 2 small holes in it that line up with 2 plastic knobs on the back cover.just remember to put the silver ring in first!
这个答案有帮助吗？
声誉积分: 20.7千
86
89
33
声誉积分: 11
1
2
Is the adhesive that holds the battery reusable as well? If not what should I use to replace it?
这个答案有帮助吗？
you don't really need it.. the motherboard sits on it nice and tight, and its hemmed in by all the other parts. some batteries come with adhesive. you could use double sided tape to be safe.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 633
1条评论
Thanks Majesty!
由 Derek 完成的