修复你的物品 社区 商店

第一代苹果iPad 配备有WiFi 提供16.32或64GB 型号为A1219 维修是直接的不需要任何加热。

130 个问题 查看全部

更多选项

Why can't I get the metal spudger between frontpanel and the rear?

Hi,

I need to replace the front panel of my Ipad. My wife dropped the IPAD and the glass cover is completely shattered, but the IPAD is still operational.

I got all the necessary specialised tools and components, downloaded your repair guide and watched the video for this specific repair job.

I can't get the metal spudger (sold to me as the original IPAD opening tool) between frontpanel and the rear casing without damaging the rear casing.

Obviously I must be doing something wrong.

Please advise.

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

3个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

First, you should have at minimum two spudgers, but three to four is optimal. Make sure to start on the right side to get the tabs out. If using a wide spudger the damage to the housing will be minimal. I am able to get into an iPad without leaving a trace - so it is possible. Plan ahead and purchase ten spare clips as those break easily and are cheap. Also purchase spare pads so the replacement screen doesn't sit lower than the housing.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

In fact, I think there's no way to open the iPad without breaking something.

I've damaged a little the inner plastic frame of the display and many plastic flaps (used to keep the display inside the case) broke off.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

更多选项

Hi ,

I also had some problems opening the Ipad, but in the end it worked. I had to replace the flaps. I just a plastic tool :)

Did you replace the screen with succes? because I didn't.

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

toine 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 1,072