已解决： I can’t get the home button bracket screws out! - iPhone SE

I can’t get the home button bracket screws out!

Hi,

I have repaired 2 iPhone SEs so far, and every single one I have found the two screws over the home button bracket very hard to get out. I have ripped the bracket out successfully twice, but because of the shattered screen on this one, I cannot get it out at all! The screws are also now stripped!

Any ideas?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

发帖于: 2019年12月31日

更多选项

On water damaged SE’s I have drilled the left screw out than covered the home button components and applied super glue to the screw on the right.

I than bend the bracket up from the left and turn the bracket hopping the right screw will come loose. If this doesn’t work I drill it out.

They are easy to drill out if you have the right tools. I use a Dremel with dentist bits. If I were you I would invest in some quality drivers for removing the screws.

这个答案有帮助吗？

是否

得分 1

2条评论:

I’m definitely going to hive drilling a go, however where can I get the correct type? I searched for one, but had no matches. Thank you.

由 TheRe 完成的 2020年1月1日

I think I purchased mine from iPad Rehab but that was years ago.

由 Chris Stables 完成的 2020年1月1日

添加一条评论

iPhone SE

I can’t get the home button bracket screws out!

1个答案

添加你的答案