跳转到主内容

Model A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, or 3.06 GHz Core 2 Duo processor

444 个问题 查看全部

iMac 24" Black Screen

iMac 24" 2.4 GHz We push the power the Cd drive spins and nothing else. Pulled the hard drive everything is there and working. Just turn off

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -2

评论:

Can you give us more information? What speed is it? Did you do anything before it stopped booting? Can you boot off a CD?

完成的

Which 24" iMac is it?

完成的

添加一条评论

9个回答

已选择的解决方案

I'd check to make sure it's not the LCD by booting the iMac connected to an external display. If you get nothing on the external then you can rule out the LCD and see if its a logic board or video ram issue.

UPDATE:

If you're not getting video on an external display this starts pointing fingers at the logic board, or possible fans and sensors. My 24" iMac crashed about 4 months after purchase and then would hang on boot, turned out to be the fans and temp sensors.

If you have applecare take it in.

If you have another mac, try booting your imac while holding T to boot in target disk mode. and connect via firewire to another mac, if it works you can backup your files before sending it to apple,

apple doesn't really guarantee your data if you take it in under warranty.

这个答案有帮助吗?

得分 3

评论:

There is no signal on an external display.

完成的

添加一条评论
最有帮助的答案

Interesting problem... Without more information it will be hard to diagnose. Based on what you have said though, it could be that your power supply isn't supplying enough power to the computer to start everything up. I hate to say it, but if it's not that, you probably have a bad logic board.

这个答案有帮助吗?

得分 3
添加一条评论

You could try clearing the parameter ram.

Hold down Command + option + p + r and power the system on. Keep holding until it resets again.

This just resets the hardware and reinitializes everything so its fresh.

这个答案有帮助吗?

得分 2

评论:

I have tried the Hold down Command + option + p + r and power.

完成的

添加一条评论

Do you see any video? Maybe screen on your iMac is acting up.

这个答案有帮助吗?

得分 0

评论:

There is know back light or any thing on the display.

完成的

添加一条评论

Does it chime? Or you just hear the CD drive spin before it quits? If no chime, not much else is going to happen in terms of resetting PRAM as others suggested. If it was a G5 model I'd holler about the capacitors (LB or PS.)

这个答案有帮助吗?

得分 0

评论:

No Chime I think it is the Logic Board or power supply. Thank you for your help

完成的

Do you get any POST indication? IOW when it won't start up, does the power light do any repetitive blinking?

Since you've opened it up, can you attempt booting it while it's open? Older iMacs had some diagnostic lights inside on the logic board.

完成的

添加一条评论

I got the io board replaced and it is up and running. Thanks

这个答案有帮助吗?

得分 0
添加一条评论

I am having the same problem with my 24" iMac. The LCD is black. Maybe replacing the io board will work for me also.

这个答案有帮助吗?

得分 0
添加一条评论

What is an I/O board? Is it the Logic board?

这个答案有帮助吗?

得分 0
添加一条评论

http://www.youtube.com/watch?v=zU9wflqbp...

I have the same problems.. you can check them in the video above :((

please does anybody know what is wrong... only 3 years old and allready failing.... this cannot be real!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Support42 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 8,024