please identify resistor on the powerboard
Machine could not be switched on. Replaced the logic board battery, reset the PMU, did all the other tricks recommended on this site. Took the machine to pieces, got to the power board, removed the obviously faulty resistor. Having trouble identifying it since the colour bands are hard to make out, could be a browny green or a greeny brown. It could be 12 Ohms or a smaller number. Does anyone on here know the likely value of this resistor?
ETA: the colours are clear in daylight, not sure which sequence is correct though
3条评论
A picture would be useful as there are a few resistors and capacitors on the power board 在已经存在的问题里加入图片
由 Dan 完成的
@Folake Shoga - Really need to know where on the board it came from.
由 Dan 完成的
Thanks guys. I’ll post again after we’ve tried the fix
由 Folake Shoga 完成的