Engine Misfire after heating up

Question

1997–2003 Lexus RX

The first generation of the Lexus RX300 luxury sedan SUV crossover.

9 个问题查看全部

fa sao @fasao

声誉积分: 1

发帖于: 2019年11月2日

更多选项

Engine Misfire after heating up

Hi, I have RX300 99’model. the engine misfire when its heating up and the heat indicator show just a little over half. Already checking coils, already changing plugs. and i even changed the distributor. yet the problem still persists . it is not like misfiring all the time but when i try to over take or climb up, i cannot raise above 50 at all. i had to ease on the accelerator little bit and press it again then ease again then press it again. Can anybody help me with that please?

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

Duane Donaldson @duanedonaldson 声誉积分: 829 3 · Answer 1 · 2019-11-02T06:51:45-07:00

Duane Donaldson @duanedonaldson

声誉积分: 829

3

发帖于: 2019年11月2日

更多选项

If you accellerate slowly going down the highway can you slowly gain speed up to 70MPH? Misfire while trying to accellerate quickly is usually a problem with the MAF or MASS or MAP sensors. If you cannot go up to a higher speed under heavy or normal accelleration, you also can have a fuel delivery problem, low fuel pressure, weak fuel pump, clogged fuel filter, problem with clogged intectors, etc. The best thing to do is have the computer scanned for the data and watch live to see what is happening under heavy accelleration even if you are in the parking lot.

这个答案有帮助吗？

是否

得分 0

添加一条评论

1997–2003 Lexus RX

Engine Misfire after heating up

1个答案

添加你的答案