Part of the screen has no image after repair

Question

iPad Mini 2 Wi-Fi

Wi-Fi版的iPad Mini 2指南。2013年10月22号发布同年11月12号上市。iPad Mini 2就是配备了Retina显示屏的iPad Mini，在更小尺寸的的7.9寸屏幕上拥有和iPad Air相同的像素。

220 个问题查看全部

Aleksey @aleksey16

声誉积分: 1

发帖于: 2019年10月20日

更多选项

Part of the screen has no image after repair

The touch screen connector was replaced. After that, my device worked okay for about a month, until this issue appeared:

About one quarter to one third of the screen became gray blank. It is always the same size, but the “texture” changes. When you turn the screen on, this blank part starts black, then it slowly goes gray (brighter) and so the texture becomes clearly visible. Also, there are very rare moments, when this blank part disappears at all and you can see the full screen, as it should be, for a second or less.

What I’ve noticed recently (and I’m not sure it was so from the start) is that exactly this blank part is not responsive to touch either.

What might be the problem? What parts of the device have to be replaced or repaired?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

1个答案

已选择的解决方案

arbaman @arbaman

声誉积分: 102.6千

10

54

291

发帖于: 2019年10月20日

更多选项

Screen problems showing after replacing a connector on the board would suggest me to first check the work that was done on the board previously. Having been opened before, I’d speculate it was for fixing a previous problem, was it a bump, a liquid damage ? A known good screen would make things easier and help figuring out if it’s an Lcd or a board issue.

这个答案有帮助吗？

是否

得分 2

1条评论:

Well, yes, it started when I dropped it (no liquid). So, the screen was broken. I've tried to replace it myself, but failed. I've damaged contacts on the touch screen socket connecter. What I've learned surfing web is that these contacts are especially weak on that model. So, next, I went to a repair service, and they replaced the socket connecter, soldering a new one (the touch screen connecter, not the display one). No other service was done before or after it. I will try another screen, if possible, in the next few days.

由 Aleksey 完成的 2019年10月21日

添加一条评论

Well, yes, it started when I dropped it (no liquid). So, the screen was broken. I've tried to replace it myself, but failed. I've damaged contacts on the touch screen socket connecter. What I've learned surfing web is that these contacts are especially weak on that model. So, next, I went to a repair service, and they replaced the socket connecter, soldering a new one (the touch screen connecter, not the display one). No other service was done before or after it. I will try another screen, if possible, in the next few days. — Aleksey

iPad Mini 2 Wi-Fi

Part of the screen has no image after repair

1个答案

添加你的答案