Skip to main content

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

384 个问题 查看全部

iMac mid 2011 black screen on boot

I opened up my iMac mid 2011 21.5 to change the HDD to an SSD.

Now all I get is a black screen after chime on boot. I’ve tried resetting PRAM, ensuring all 4 cables are seated correctly (the LVDS connection is a bit loose but is in), all 4 diagnostics LEDs come on and stay on.

I changed back to the original HDD, I’ve cleaned all the dust out…but still no luck.

Anybody got any other ideas? Thanks

Update (10/03/2019)

Oh, and I can’t see any icons when shining a torch on the screen.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

Android 维修工具包



Android 维修工具包



1 Answer

Chosen Solution

Check your V Sync cable is not damaged first.

Sounds like your LED driver board has failed. This can happen if you plug in the LVDS cable backwards! Take a look just below the LVDS connector on the logic board are the components burnt?

Block Image

A loose connector also implies you pulled on it a bit so the connection is not tight. You may need to replace it.

Here’s how to take the LED Driver board out to inspect it as well iMac Intel 21.5" EMC 2428 LED Driver Board Replacement. Compare it to the images here iMac Intel 21.5" EMC 2428 LED Driver Board If you see any burnt areas you’ll need to replace it.

iMac Intel 21.5" EMC 2428 LED Driver Board图片


iMac Intel 21.5" EMC 2428 LED Driver Board


Was this answer helpful?

Score 1


Thanks Dan. None of the components appear burnt. So, will have to a new cable I think.


Add a comment

Add your answer

Simon will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 26