跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2688 个问题 查看全部

Compass not working and gyroscope inverted

Hi guys,

I just swapped my first NAND for a customer because the old one was broken. I received the wifi/bt address with help from a friend in China. It worked after some trial and error but now the compass/gyroscope is acting weird.

When I use the camera it thinks it is in landscape when I hold it vertically and vice versa.

The compass and level tool are also stuck.

I already replaced the compass and phosporous which is under the NAND. THOUGHT I might have broken it when replacing the NAND. Also replaced both gyroscope IC (U3010, U3030) just in case. I don’t have a detailed diagram for intel mainboards so I am not to sure about the voltages but for the lines that have the value in their name it is all correct. I restored the phone after every IC I replaced.

Undo typing works

Phone wasn’t working when it came in because she somehow fried her NAND. Could not be read with a NAND reader.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

Are you sure you are talking about the iPhone 6S? There is only one version of the logic board (no Intel vs. Qualcomm like on the 7).

You might want to check Phosporus U3020); it is right next to the NAND. While it is the barometer and not an accelerometer, the 4 sensor IC’s do all interact. Look up the voltages and inspect for trace damage or dislodged components near the NAND and on the reverse side.

这个答案有帮助吗?

得分 1

3条评论:

Oh yeah my bad, I got two phones mixed up. Both have NAND problems. I replaced the phosporous as well. All 4 IC have been swapped. Compass, 2 gyroscope and the phosporus. I will double check the voltages and for damage on the board.

完成的

Hmmm I might have screwed up the mainboard.

I am getting a green startup screen with black apple logo. The colors are distorted and almost impossible to see. Anyone have encountered this problem before after NAND??

完成的

For people who repair NAND. I reballed the NAND and after a few tries, it was fine again. Maybe I used too little solder paste. Compass/gyroscope problem still there. Replaced the 4 IC just in case one of them was bad. Measured the voltages and resistance values and they are all within range. Main board problem?? She did fry her NAND

完成的

添加一条评论

添加你的答案

KWH 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 969