跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2688 个问题 查看全部

Damage to digitizer cable

Replacing the cables after putting in the new battery, there is this warning at step 20:

When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

What does this damage look like? I hooked everything back together for a test and the phone functions BUT: there is a black patch about where the wi-fi, battery charge is shown, and wide grayish vertical streaks on the screen; the screen is also slightly faded. Did I damage that connector? The screen was fine before.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

最有帮助的答案

The connector on the 6s isn't too bad its mainly the plus that is temperamental because the connector is physically longer...

The problem u describe sounds more like a faulty screen. Disconnect and check the connectors though make sure it's not bent and the pins dont look like theyve come away from the flex

这个答案有帮助吗?

得分 1
添加一条评论

Well what happens sometimes is that the connector becomes a bit concaved.

To fix that you put one finger above and one under and attempt to flatten the connector back very carefully.

If you look at the pins carefully on its side you'll see where the bend is very easily if there is one.

这个答案有帮助吗?

得分 0

1条评论:

Both helpful responses. The screen was fine when I began. I have been back through the procedure several times and the cables all seem to seat correctly and the phone will start up but the vertical striations and black patch covering the battery, w-fi status are still there. I don't think I damaged the screen but who knows.

完成的

添加一条评论

添加你的答案

dbh 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 144