The expansion port on my controller stopped working, haven't opened it up but It is definitely the expansion port (the 3.5mm adapter works just fine in other controllers) I was wondering if the best option for fixing it would be replacing the single port or the whole motherboard.(I have no idea which one its connected to)
声誉积分: 685.2千
3.4千
1.1千
2.6千
I’d open it up and see if you can’t spot the problem, look for burned components:
Xbox One Wireless Controller Model 1708 Bottom Motherboard Replacement
这个答案有帮助吗？
声誉积分: 88.7千
192
260
144
The issue with replacing the port is it’s mounted with SMD soldering so you can’t easily replace it. Unless you have a donor secondary board and really good soldering skills, you will mess up the connector if you even try removing it.
That said, it’s rare for the connector to fail in general (unless you spilled Mountain Dew on the port). Try doing what @mayer suggested and look for burned resistors and capacitors. Unlike the connector, it’s practical to replace SMD parts on that level. It also wouldn’t hurt to protect the connector with kapton tape to err on the side of caution.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 342
