跳转到主内容

Repair guides and support for Kenmore washing machines.

1527 个问题 查看全部

Spin Cycle Needs Manual Attention

My top loaded Kenmore washer (Model 110) won’t spin on the spin cycle unless I open the door at the start of the spin cycle. It sounds like it’s spinning, but nothing happens until I lift the lid (which stops the motor), and then re-close the door (which then starts the spinning). I have no issues with the agitator, and I’ve replaced the lid switch but that didn’t fix the problem.

Since the spin function works when I re-close the door, I have a hard time thinking it’s the coupler or pressure switch.

Any ideas???

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论

Apple Watch 套装

Screen and battery repairs just got easier.

现在开始购物

Apple Watch 套装

Screen and battery repairs just got easier.

现在开始购物

1个答案

已选择的解决方案

I suspect your neutral drain assembly of the transmission is not disengaging during the pause between the drain and spin cycles. When you open the lid and stop the engine, it removes enough pressure to allow the neutral drain assembly to disengage.

You may want to make sure the timer is allowing a long enough pause between the drain and spin cycles to give the motor enough time to coast to a stop and disengage the neutral drain. It should be about 2 minutes.

Also, here is a video replacing the neutral drain assembly: https://www.youtube.com/watch?v=cUOH67Wi...

这个答案有帮助吗?

按维修分数 1

评论:

Thank you @tdunc15 ! Is it possible to change the amount of time between the drain and spin cycles?

添加一条评论

添加你的答案

Kenny Coleman 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 44