声誉积分: 4.5千
8
12
3
I recently replaced the stand on this machine. After doing so, it won’t hold a forward tilt. It always returns to the uppermost tilt position. I’m just wondering if there’s a way for me to manually adjust this. It seems like the springs need to be loosened somehow. Thanks!
声誉积分: 479.3千
35
329
971
Did you get the 27” hinge or did you get the 21.5” by mistake?
iMac 27" Hinge/Clutch Mechanism (11) - Apple P/N 922-9878
iMac 21.5" Hinge/Clutch Mechanism (09/10/11) - Apple P/N 922-9133
They look the same! The spring tensions are very different!
这个答案有帮助吗？
I actually just installed the stand, the hinge mechanism was pre-installed.
Then you likely need a new hinge as the spring has snapped!
FYI: It’s a a very big job as its behind the logic board.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 79
