broken lcd but everything else is fine, can I repurpose?

Benjamin Busby  that is a really good question and I have asked myself this before. I have been tinkering around with monitors and TV’s for a while and broken LCD’s seem to always be the end of those. However, I think it should be possible to adapt a different panel. biggest issue here is your T-con board output. I am not sure which 2 flat ribbon cables you are referring to but assume you are talking about the ones coming of the T-con board and go to the LCD control board. That board is part of the panel and can not be replaced without major equipment (TAB machine). Whatever replacement panel you can scrounge, you would need the electrical characteristics of that, basically the pinouts of the connector. Than match those with the ones coming from your T-con board. As you can see, something like this can become pretty involved and time consuming. If you are up to it and have time to fiddle around, let us know when you find a replacement panel. For now, post some good pictures of your boards with your question, as well as the label from the back of your panel. That’ll give us a starting point.

在已经存在的问题里加入图片